|
⇤ ← Revision 1 as of 2020-03-21 22:33:22
Size: 1472
Comment:
|
Size: 1485
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 5: | Line 5: |
| . [[ https://www.amazon.com/gp/product/B01N7YQO9G | amazon page ]] [[ https://www.amazon.com/gp/product/B01N7YQO9G/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1#Ask | questions and answers ]] | . [[ amazon product page | https://www.amazon.com/gp/product/B01N7YQO9G ]] . [[ https://www.amazon.com/gp/product/B01N7YQO9G/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1#Ask | questions and answers ]] |
PowerLink
Setting up a tp-link TL-PA7010P KIT V2, Arriving Thursday March 26
- Plug in one unit in the basement and connect it with an ethernet cable directly to the Verizon(?) cable modem with wifi.
- Plug in one unit in Susan's upstairs office
Plug these directly into the wall sockets, NOT a power strip (which can plug into the power socket on this device)
- Remove the wifi access point from the stairwell and bring it upstairs to plug into the upstairs unit with an ethernet cable.
If this works out, consider ordering https://www.amazon.com/gp/product/B0725LPTZR/
- one can plug in at Susan's living room desk, the other in the guest bedroom
The load center (circuit breaker box) downstairs has two 120 volt legs on the left and right. Some of the wall sockets will be connected to one, some to the other, so there is no direct wire path between some pairs of sockets. While that could be a problem, this https://www.amazon.com/ask/questions/Tx1TGZ4HVQAZIX8/ref=ask_dp_al_al_hza suggests that the signal can magically bridge the gap between legs.