|
Size: 4708
Comment:
|
Size: 4774
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 22: | Line 22: |
| . Draws 3 to 100 watts, monitored with a [[http://www.p3international.com/products/p4400.html | Kill-a-Watt ]] digital meter. | . Draws 3 to 100 watts, monitored with a [[http://www.p3international.com/products/p4400.html | Kill-a-Watt ]] digital power meter. |
| Line 38: | Line 38: |
| || [[ attachment:IMG_0102.JPG | {{ attachment:IMG_0102.JPG | | height=50 }} ]] || Kill-A-Watt meter feeding power to refrigerator. Can exceed 100 watts during "Power Cool". Usually runs below 3 watts. || || [[ attachment:IMG_0105.JPG | {{ attachment:IMG_0105.JPG | | height=50 }} ]] || Basement: [[ https://www.acinfinity.com/hydroponics-growers/booster-duct-fans/raxial-s6-inline-booster-duct-fan-with-speed-controller-6-inch/ | AC Infinity fan ]] and [[ https://www.acinfinity.com/hydroponics-growers/duct-fan-silencers/ac-infinity-inline-duct-fan-silencer-6-inch/ | duct silencer ]] to floor vent above. Thermocouple attached to sheet metal duct. Currently running at full speed, about 40 watts. Much quieter at partial speed, but refrigerator runs too hot. || || [[ attachment:IMG_0104.JPG | {{ attachment:IMG_0104.JPG | | height=50 }} ]] || Basement: Duct connection to refrigerator floor vent. <<BR>><<BR>>~-''FYI Samsung engineers: Not relevant to the refrigerator, but the blue device on the lower right is a medical grade isolation transformer for my electronics workbench, isolating line voltage hot and neutral for workbench safety. Thermally isolated from the vent above, with cooling air blown towards the far right, away from the refrigerator vent intake. Your workbench should have this. ''-~|| |
|| [[ attachment:IMG_0102.JPG | {{ attachment:IMG_0102.JPG | | height=50 }} ]] || [[http://www.p3international.com/products/p4400.html | Kill-a-Watt ]] meter feeding power to refrigerator. Can exceed 100 watts during "Power Cool". Usually runs below 3 watts. || |
| Line 43: | Line 41: |
| || [[ attachment:IMG_0105.JPG | {{ attachment:IMG_0105.JPG | | height=50 }} ]] || Basement: [[ https://www.acinfinity.com/hydroponics-growers/booster-duct-fans/raxial-s6-inline-booster-duct-fan-with-speed-controller-6-inch/ | AC Infinity fan ]] and [[ https://www.acinfinity.com/hydroponics-growers/duct-fan-silencers/ac-infinity-inline-duct-fan-silencer-6-inch/ | duct silencer ]] to floor vent above. Thermocouple attached to sheet metal duct. Currently running at full speed, about 40 watts. Much quieter at partial speed, but refrigerator runs too hot. || || [[ attachment:IMG_0104.JPG | {{ attachment:IMG_0104.JPG | | height=50 }} ]] || Basement: Duct connection to refrigerator floor vent. <<BR>>~-''FYI Samsung engineers: Not relevant to the refrigerator, but the blue device on the lower right is a medical grade isolation transformer for my electronics workbench, isolating line voltage hot and neutral for workbench safety. Thermally isolated from the vent above, with cooling air blown towards the far right, away from the refrigerator vent intake. Your workbench should have this. ''-~|| |
|
| Line 44: | Line 44: |
| Note 1: I have a rope taped around the back for rolling the refrigerator out of the compartment. The force bears on the edges of side panels, not the back panel or the door. Much safer than the hand truck used by the delivery people; I don't know what might be damaged underneath. | Note 1: I have a rope taped around the back for rolling the refrigerator out of the compartment. The force bears on the edges of side panels, not the back panel or the door. Much safer than the hand truck used by the delivery people; I don't know what they might have damaged underneath. |
Samsung Refrigerator
This page at keithl/samsung
- Samsung RT18M 6213 WW/AA
- Compressor MSV4A1AL1R/TT3
- 0F364DBKB00391P
- Contact me at keithl AT keithl DOT com (plain ascii, not html please).
Problem
- Even at "5 bars", "Fridge" compartment won't cool more than 40 degrees below ambient room temperature
- ambient can be 85F in August
- "Power Cool" temporarily lowers temperature more
More information
- Temperatures measured using thermocouples on Taylor "outdoor" thermometers.
- Installed in wooden kitchen refrigerator compartment
- Opening is 33 inches wide (plus extra inch inside), 68 inches high, 27 inches deep, with 3 inch space in back.
- Hot not-air-conditioned garage behind back wall - aluminum foil on inner wall minimizes radiant heat.
- Extra open space inside the back of lower fridge compartment, surrounding the round black vent.
- Refrigerator very quiet. I expected some compressor noise.
Draws 3 to 100 watts, monitored with a Kill-a-Watt digital power meter.
- Freezer compartment works fine at "two bars", opened twice per day, mostly to access "power cool" for fridge.
Added a 300 cubic foot per minute floor vent blowing air at lower back left side, see pictures below.
- Floor vent reduces maximum temperature excursion by 4F, but vent fan is noisy and consumes 40 more watts.
Usage
- Mostly use refrigerator for fresh food, dairy and lots of vegetables
- No icemaker installed, rarely use ice, not many frozen foods
Purchase and Warranty
Purchased 2019 July 9 for $648 from Home Depot 4401 SW 110th Ave Beaverton OR 97005. Delivered 2019 July 22
- Purchased additional 3 year Home Depot protection plan for $90 ... but Home Depot doesn't answer phone within 40 minutes.
Photos taken on 80 fahrenheit July morning - Click photo for larger view
|
Thermocouple temperatures, top is left compartment wall, bottom is interior upper glass shelf |
|
Inside of compartment. Thermocouple on "stovetop wall", 300 cfm vent at bottom, power routed through Kill-A-Watt meter, foil radiant barrier and 3 inch styrofoam ball spacer in back |
|
Kill-a-Watt meter feeding power to refrigerator. Can exceed 100 watts during "Power Cool". Usually runs below 3 watts. |
|
Vents at back bottom of refrigerator. No detectable sound, no air blows in or out |
|
Close-up of left back vent. What's that strange bit of light brown foam just inside the vent? |
|
Basement: AC Infinity fan and duct silencer to floor vent above. Thermocouple attached to sheet metal duct. Currently running at full speed, about 40 watts. Much quieter at partial speed, but refrigerator runs too hot. |
|
Basement: Duct connection to refrigerator floor vent. |
Note 1: I have a rope taped around the back for rolling the refrigerator out of the compartment. The force bears on the edges of side panels, not the back panel or the door. Much safer than the hand truck used by the delivery people; I don't know what they might have damaged underneath.
Note 2: COVID-19 is rampant in the United States in July 2020. I hope to get warranty service, but I request technicians wear protection inside the house. I can provide face masks and shields, and "clean-room" style outer isolation clothing, donned in the garage before entering the house.